X-Git-Url: https://www.hackdaworld.org/gitweb/?a=blobdiff_plain;f=fx2%2Ffx2.c;h=0ba6db9da40da48d38b35b0040fba80f958d9279;hb=dda42c5ae4c74fdb488ae105d2a493bce58483fa;hp=c52c81b082282a25b992ced01b2a9ef69ec2e57b;hpb=6b7ac2a1220c38d01b25fb8a3c9ec649e9398fda;p=my-code%2Ffpga.git

diff --git a/fx2/fx2.c b/fx2/fx2.c
index c52c81b..0ba6db9 100644
--- a/fx2/fx2.c
+++ b/fx2/fx2.c
@@ -11,10 +11,7 @@
  */
 
 /* constant definitions */
-#define TRUE	1
-#define FALSE 	0
-#define POWER_ON	1;
-#define POWER_OFF	0;
+#define GET_TDO		0x20
 
 /* type definitions */
 typedef unsigned char u8;
@@ -32,6 +29,8 @@ xdata at 0xe601 volatile u8 IFCONFIG;
 /* endpoint configuration */
 xdata at 0xe604 volatile u8 FIFORESET;
 xdata at 0xe60b volatile u8 REVCTL;
+xdata at 0xe610 volatile u8 EP1OUTCFG;
+xdata at 0xe611 volatile u8 EP1INCFG;
 xdata at 0xe612 volatile u8 EP2CFG;
 xdata at 0xe613 volatile u8 EP4CFG;
 xdata at 0xe614 volatile u8 EP6CFG;
@@ -40,9 +39,24 @@ xdata at 0xe618 volatile u8 EP2FIFOCFG;
 xdata at 0xe619 volatile u8 EP4FIFOCFG;
 xdata at 0xe61a volatile u8 EP6FIFOCFG;
 xdata at 0xe61b volatile u8 EP8FIFOCFG;
+xdata at 0xe620 volatile u8 EP2AUTOINLENH;
+xdata at 0xe621 volatile u8 EP2AUTOINLENL;
 xdata at 0xe624 volatile u8 EP6AUTOINLENH;
 xdata at 0xe625 volatile u8 EP6AUTOINLENL;
 
+/* endpoint control/status */
+xdata at 0xe6a1 volatile u8 EP1OUTCS;
+xdata at 0xe6a2 volatile u8 EP1INCS;
+xdata at 0xe68d volatile u16 EP1OUTBC;
+xdata at 0xe68f volatile u16 EP1INBC;
+
+#define STALL	0x01
+#define BUSY	0x02
+
+/* access to endpoint buffers */
+xdata at 0xe780 volatile u8 EP1OUTBUF[64];
+xdata at 0xe7c0 volatile u8 EP1INBUF[64];
+
 /* special funtion registers */
 sfr at 0xb5 OED;
 sfr at 0xb0 IOD;
@@ -64,6 +78,7 @@ void power_init() {
 
 	/* configure pin 7 of port d as output */
 	OED|=(1<<7);
+	SYNCDELAY;
 
 }
 
@@ -76,6 +91,25 @@ void toggle_power() {
 	else
 		IOD|=(1<<7);
 
+	SYNCDELAY;
+
+}
+
+void jtag_init() {
+
+	/* pin 5 of port d disables tdi -> tdo forward */
+	OED|=(1<<5);
+	IOD|=(1<<5);
+
+	/* jtag pins:
+	 * tdi - pin 0 (input)
+	 * tdo - pin 2 (output)
+	 * tms - pin 3 (output)
+	 * tck - pin 4 (output)
+	 */
+	OED|=((1<<2)|(1<<3)|(1<<4));
+	OED&=~(1<<0);
+
 }
 
 void cpu_init() {
@@ -96,29 +130,49 @@ void slave_fifo_init() {
 	/* initialization of the slave fifo, used by external logic (the fpga)
 	 * to do usb communication with the host */
 
-	/* set bit 0 and 1 - fifo slave config */	
-	IFCONFIG|=0x03;
-	SYNCDELAY;
-
-	/* async mode */
-	IFCONFIG|=0x04;
+	/* enable dyn_out and enhanced packet handling (p. 189) */
+	REVCTL=0x03;
 	SYNCDELAY;
 
-	/* p. 180: must be set to 1 */
-	REVCTL|=((1<<0)|(1<<1));
+	/* internal 48 mhz clock, async, slave fifo */
+	IFCONFIG=0xcb;
 	SYNCDELAY;
 
-	/* 8 bit fifo to all endpoints
+	/* endpoint setup:
 	 *
-	 * ('or' of all these bits define port d functionality)
+	 * ep2: bulk out 2x512
+	 * ep4: bulk out 2x512
+	 * ep6: bulk in 2x512
+	 * ep8: bulk in 2x512
 	 */
-	EP2FIFOCFG&=~(1<<0);
+	EP2CFG=0xa2;
+	EP4CFG=0xa0;
+	EP6CFG=0xc2;
+	EP8CFG=0xc0;
+	SYNCDELAY;
+
+	/* reset the fifo */
+	FIFORESET=0x80; /* nak all transfers */
+	SYNCDELAY;
+	FIFORESET=0x02; /* reset ep2 */
+	SYNCDELAY;
+	FIFORESET=0x04; /* reset ep4 */
+	SYNCDELAY;
+	FIFORESET=0x06; /* reset ep6 */
+	SYNCDELAY;
+	FIFORESET=0x08; /* reset ep8 */
+	SYNCDELAY;
+	FIFORESET=0x00; /* restore normal operation */
 	SYNCDELAY;
-	EP4FIFOCFG&=~(1<<0);
+
+	/* 8 bit fifo to all endpoints */
+	EP2FIFOCFG=;
+	SYNCDELAY;
+	EP4FIFOCFG=;
 	SYNCDELAY;
-	EP6FIFOCFG&=~(1<<0);
+	EP6FIFOCFG=;
 	SYNCDELAY;
-	EP8FIFOCFG&=~(1<<0);
+	EP8FIFOCFG=;
 	SYNCDELAY;
 
 	/* default indexed flag configuration:
@@ -130,34 +184,6 @@ void slave_fifo_init() {
 	 * todo: -> fixed configuration
 	 */
 
-	/* endpoint configuration:
-	 *
-	 * ep2: bulk in 4x512
-	 * ep6: bulk out 4x512
-	 *
-	 * 0xa0 = 1 0 1 0 0 0 0 0 = bulk out 4x512
-	 * 0xe0 = 1 1 1 0 0 0 0 0 = bulk in 4x512
-	 * 0x01 = 0 0 0 0 0 0 0 1 = invalid (bit,type,buf)
-	 */
-	EP2CFG=0xa0;
-	SYNCDELAY;
-	EP4CFG=0x01;
-	SYNCDELAY;
-	EP6CFG=0xe0;
-	SYNCDELAY;
-	EP8CFG=0x01;
-	SYNCDELAY;
-
-	/* reset the fifo */
-	FIFORESET=0x80; /* nak all transfers */
-	SYNCDELAY;
-	FIFORESET=0x02; /* reset ep2 */
-	SYNCDELAY;
-	FIFORESET=0x06; /* reset ep6 */
-	SYNCDELAY;
-	FIFORESET=0x00; /* restore normal operation */
-	SYNCDELAY;
-
 	/* auto in/out, no cpu interaction! auto in len = 512 */
 	EP2FIFOCFG|=(1<<4);
 	SYNCDELAY;
@@ -182,10 +208,18 @@ void ep1_init() {
 	 * default (valid, bulk) fits!
 	 */
 
+	/* arm ep1out, clear ep1out and ep1in stall bit */
+	EP1OUTBC=0;
+	EP1OUTCS&=~STALL;
+	EP1INCS&=~STALL;
+
 }
 
 void fx2_init() {
 
+	/* syncdelay */
+	SYNCDELAY;
+
 	/* cpu init */
 	cpu_init();
 
@@ -198,16 +232,31 @@ void fx2_init() {
 
 	/* ep1 init */
 	ep1_init();
+
+	/* jtag init */
+	jtag_init();
 }
 
 void main() {
 
+	u8 buf,set;
+
 	/* initialize the fx2 */
 	fx2_init();
 
-	/* do the job ... */
+	/* jtag by polling ep1 */
+
 	while(1) {
-	
+		if(!(EP1OUTCS&BUSY)) {
+			set=IOD;
+			buf=EP1OUTBUF[0];
+			IOD=(IOD&(~0x1c))|(buf&0x1c);
+			EP1OUTBC=1;
+		}
+		if(!(EP1INCS&BUSY)) {
+			EP1INBUF[0]=IOD&0x01;
+			EP1INBC=1;
+		}
 	}
 
 }