.arm
# exception handling must go to the very beginning
-
- b handler_reset
- b handler_undef_instruction
- b handler_soft_ir
- b handler_prefetch_abort
- b handler_data_abort
+ #
+ # concerning irq:
+ # - the ldr is at 0x18
+ # - pc will be 0x18 + 8 at the moment of ldr (pipeline)
+ # - substract 0xff0 => 0xfffff030
+ # - that's the vectored address register
+ # - the vic put in there the address of our service routine
+
+ ldr pc, handler_reset
+ ldr pc, handler_undef_instruction
+ ldr pc, handler_soft_ir
+ ldr pc, handler_prefetch_abort
+ ldr pc, handler_data_abort
nop
- b handler_irq
- b handler_fiq
+ ldr pc, [pc, #-0xff0]
+ ldr pc, handler_fiq
- handler_undef_instruction: .word interrupt_handler_undef_instruction
- handler_soft_ir: .word interrupt_handler_soft_ir
- handler_prefetch_abort: .word interrupt_handler_prefetch_abort
- handler_data_abort: .word interrupt_handler_data_abort
- handler_irq: .word interrupt_handler_irq
- handler_fiq: .word interrupt_handler_fiq
+handler_reset: .word handle_reset
+handler_undef_instruction: .word interrupt_handler_undef_instruction
+handler_soft_ir: .word interrupt_handler_soft_ir
+handler_prefetch_abort: .word interrupt_handler_prefetch_abort
+handler_data_abort: .word interrupt_handler_data_abort
+handler_fiq: .word interrupt_handler_fiq
# reset handling goes here
-handler_reset:
+handle_reset:
# init stack pointer for each mode + set stack limit
ldr r0, =stack_limit
mov sl, r0
- # copy data section
+ # copy data section (only if we are in flash <=> _etext != _data)
ldr r1, =_etext
ldr r2, =_data
ldr r3, =_edata
+ cmp r1, r2
+ beq start_of_c_code
+
copy_data_loop:
cmp r2, r3
# jump to c code
+start_of_c_code:
+
adr lr, loop_forever
mov r0, #0
mov r1, #0