From: hackbard Date: Sat, 4 Aug 2007 22:05:53 +0000 (+0200) Subject: firmware upload to ram possible X-Git-Url: https://hackdaworld.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=14acad803dec0c6e18b1825f2b84e9bbcd409554;p=my-code%2Farm.git firmware upload to ram possible --- diff --git a/betty/lpcload.c b/betty/lpcload.c index 905ebbd..6ec1186 100644 --- a/betty/lpcload.c +++ b/betty/lpcload.c @@ -1,8 +1,10 @@ /* * lpcload.c - load firmware into ram of lpc2220 via uart0 * - * author: hackbard@hackdaworld.org + * author: hackbard@hackdaworld.org, rolf.anders@physik.uni-augsburg.de * + * build: make + * usage: sudo ./lpcload -d /dev/ttyS0 -f firmware.hex [-v] */ #include @@ -56,8 +58,6 @@ typedef struct s_lpc { char fwfile[128]; /* firmware file */ u8 info; /* info/mode */ char freq[8]; /* frequency */ - int partid; /* part id */ - u8 bcv[2]; /* boot code version */ u32 hoff; /* start addr of ihex file */ u32 roff; /* ram offset of uc */ } t_lpc; @@ -110,8 +110,8 @@ int open_serial_device(t_lpc *lpc) { // input options -> enable flow control //term.c_iflag&=~(IXON|IXOFF|IXANY|INLCR|ICRNL); - term.c_iflag&=~(INLCR|ICRNL); - term.c_iflag|=(IXON|IXOFF|IXANY); + term.c_iflag&=~(INLCR|ICRNL|IXANY); + term.c_iflag|=(IXON|IXOFF); // more control options -> timeout / flow control @@ -184,79 +184,68 @@ int txrx(t_lpc *lpc,char *buf,int len,u8 type) { /* cut the echo if not of type auto baud */ if(type!=TXRX_TYPE_BAUD) { - while(cnt>0) { + while(cnt) { ret=read(lpc->sfd,buf,cnt); if(ret<0) { perror("txrx echo cut"); return ret; } - if(type==TXRX_TYPE_CKSM) { - printf(" cksm resp: "); - for(i=0;isfd,buf,BUFSIZE); - for(i=0;iinfo&VERBOSE) - printf(" << "); + ret=read(lpc->sfd,buf,1); + if(ret<0) { + perror("txrx read (first byte)"); + return ret; + } + + switch(buf[0]) { + case 'S': + cnt=13; + break; + case 'O': + cnt=3; + break; + case 'R': + cnt=7; + break; + case '0': + cnt=2; + break; + default: + printf("txrx read: bad return byte '%02x'\n",buf[0]); + break; + } + ret=1; - cnt=0; - while(ret) { - ret=read(lpc->sfd,buf+cnt,BUFSIZE-cnt); + i=cnt; + while(i) { + ret=read(lpc->sfd,buf+1+cnt-i,i); if(ret<0) { - perror("txrx read"); + perror("txrx read (next bytes)"); return ret; } - if(ret+cnt>BUFSIZE) { - printf("txrx read: too small buf size (%d)!\n",BUFSIZE); - return -1; - } - if(lpc->info&VERBOSE) - for(i=0;i0x19)&(buf[cnt+i]<0x7f))? - buf[cnt+i]:'.'); - cnt+=ret; + i-=ret; } if(lpc->info&VERBOSE) { + printf(" << "); + for(i=0;i0x19)&(buf[i]<0x7f))? + buf[i]:'.'); printf(" | "); - for(i=0;ipartid=atoi(buf); - - return lpc->partid; -} - -int read_bcv(t_lpc *lpc) { - - char buf[BUFSIZE]; - char *ptr; - - memcpy(buf,"K\r\n",3); - txrx(lpc,buf,3,TXRX_TYPE_CMD); - ptr=strtok(buf,"\r\n"); - lpc->bcv[0]=strtol(ptr,NULL,16); - ptr=strtok(NULL,"\r\n"); - lpc->bcv[1]=strtol(ptr,NULL,16); - - return 0; -} - int unlock_go(t_lpc *lpc) { char buf[BUFSIZE]; @@ -359,22 +322,13 @@ int go(t_lpc *lpc) { return ret; } -int uuencode(char *in,char *out) { - - int i; - - out[0]=0x20+((in[0]>>2)&0x3f); - out[1]=0x20+(((in[0]<<4)|(in[1]>>4))&0x3f); - out[2]=0x20+(((in[1]<<2)|(in[2]>>6))&0x3f); - out[3]=0x20+(in[2]&0x3f); +int uuencode(u8 *in,u8 *out,int len) { - printf(" enc: "); - for(i=0;i<3;i++) - printf("%02x ",in[i]); - printf("-> "); - for(i=0;i<4;i++) - printf("%02x ",out[i]); - printf("\n"); + out[0]=0x20+len; + out[1]=0x20+((in[0]>>2)&0x3f); + out[2]=0x20+(((in[0]<<4)|(in[1]>>4))&0x3f); + out[3]=0x20+(((in[1]<<2)|(in[2]>>6))&0x3f); + out[4]=0x20+(in[2]&0x3f); return 0; } @@ -413,10 +367,6 @@ int write_to_ram(t_lpc *lpc,char *buf,u32 addr,int len) { /* send command and check return code */ txrx(lpc,txrxbuf,slen,TXRX_TYPE_CMD); - //if(strncmp(txrxbuf,"OK\r\n",4)) { - // printf("ram write: write command failed\n"); - // return -1; - //} /* send data */ lcount=0; @@ -426,13 +376,12 @@ int write_to_ram(t_lpc *lpc,char *buf,u32 addr,int len) { while(bcnt %d %d\n",checksum,bcnt); + checksum+=((u8)buf[bcnt]+(u8)buf[bcnt+1]+(u8)buf[bcnt+2]); /* send a data line */ txrx(lpc,txrxbuf,6,TXRX_TYPE_DATA); @@ -444,11 +393,15 @@ int write_to_ram(t_lpc *lpc,char *buf,u32 addr,int len) { /* checksum */ if((!(lcount%20))|(bcnt==nlen)) { + /* send backtick */ + memcpy(txrxbuf,"`\r\n",3); + //txrx(lpc,txrxbuf,3,TXRX_TYPE_DATA); /* send checksum */ - snprintf(txrxbuf,BUFSIZE,"%d\r\n",checksum%0x100); + snprintf(txrxbuf,BUFSIZE,"%d\r\n",checksum); slen=strlen(txrxbuf); txrx(lpc,txrxbuf,slen,TXRX_TYPE_CKSM); - if(!strncmp(txrxbuf,"RESEND\r\n",8)) { + if(!strncmp(txrxbuf,"RESE",4)) { + read(lpc->sfd,txrxbuf+4,4); printf("ram write: resending ...\n"); bcnt-=count; } @@ -470,9 +423,10 @@ int firmware_to_ram(t_lpc *lpc) { char buf[BUFSIZE]; u32 addr,len,type; - int ret; + int ret,temp; /* read a line */ + ret=1; while(ret) { /* sync line */ ret=read(lpc->fwfd,buf,1); @@ -504,14 +458,16 @@ int firmware_to_ram(t_lpc *lpc) { /* successfull return if type is end of file */ if(type==0x01) return 0; - /* read data */ - ret=read(lpc->fwfd,buf,2*len); - if(ret!=(2*len)) { + /* read data (and cksum) */ + ret=read(lpc->fwfd,buf,2*(len+1)); + if(ret!=(2*(len+1))) { printf("fw to ram: data missing\n"); return -1; } - /* checksum */ - ret=read(lpc->fwfd,buf,2); + for(ret=0;ret